Terex American HC275 is used to support the weight of the crane body and roll in the track shoes so that the machine travels along the track shoes. It has 26PCS track rollers for one set Terex American HC275 crawler crane. Both HC275 lower rollers were heat treated, use bronze bushing, that can keep

Hitachi CX500 Track shoes with pins and bolt&nuts supplier is here.The track shoe information as below,a.The weight is 38.5 per track shoe for Hitachi CX500 Crawler crane.b.Track she width is 765mm.c.Color is Black, or as your requirments.d.Material is 31Mn2Si, Pin is

1.Product detailsMaterial:35SiMn, 35Mn, 55SiMn, 34Cr2Ni2MoTechnology: CastingHeat treatment: Overall hardening and tempering, surface hardening.Warranty: 2000-2500 working hoursAdvantage: IHI CCH700 sprocketis an easily damagedpart. The wheel tread

Top Roller for Kobelco BM500 (also called carrier roller, upper roller) is assembled on the Kobelco BM500 crawler frame and hold up the Kobelco BM500 track shoes. Top Roller for Kobelco BM500 is used to hold up the track shoes assy, make the crawler shoes has a certain tension and keep the track

Terex American HC165 Track Shoe / Track Pad / Track Plate is installed in the same direction to form the belt of the head and tail. In this way, the operation uniformity is good, the wear of the track shoe is low, and the driving efficiency is high when walking.Available Undercarriage P

1. CKE2500 Bottom Roller InformationThe CKE2500 bottom rollers are used for 250 ton crawler crane, 24 pieces track bottom rollers for one CKE2500 machine.When the KOBELCO CKE2500 CKE2500-2 bottom rollers were worn seriously, the new track rollers should be replaced in time. So, it can e